Good quality Fecrco Magnet - Alnico Magnet – Horizon

Good quality Fecrco Magnet - Alnico Magnet – Horizon Featured Image
  • Good quality Fecrco Magnet - Alnico Magnet – Horizon

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

To constantly improve the management system by virtue of the rule of "sincerely, good faith and quality are the base of enterprise development", we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for Rubber Coated Neodymium Magnet, Pushpin Magnet, Magnetic Steel Chamfer Strip, Our enterprise insists on innovation to promote the sustainable advancement of organization, and make us become the domestic high-quality suppliers.
Good quality Fecrco Magnet - Alnico Magnet – Horizon Detail:

Alnico magnet is a type of hard magnet mainly composed of alloys of Aluminum, Nickel, and Cobalt. It is manufactured through either casting or sintering process. Before rare earth magnets were developed in 1970, Alnico magnet was the strongest type of permanent magnet and widely used. Nowadays, in many applications Alnico has been replaced by Neodymium or Samarium Cobalt magnet. However, its property like temperature stability and very working high temperatures makes Alnico magnets indispensable in certain application markets.

1. High magnetic field. Residual induction is high to 11000 Gauss almost similar to Sm2Co17 magnet, and then it can produce high magnetic field around.

2. High working temperature. Its maximum working temperature can be high to 550⁰C.

3. High temperature stability: Alnico magnets have the best temperature coefficients of any magnet material. Alnico magnets should be regarded as the best choice in extremely high temperature applications.

4. Excellent corrosion resistance. Alnico magnets are not prone to corrosion and can normally be used without any surface protection

1. Easy to demagnetize: Its maximum low coercive force Hcb is lower than 2 kOe and then it is easy to demagnetize in some low demagnetizing field, even not handled with care.

2. Hard and brittle. It is prone to chipping and cracking.

1. As the coercivity of Alnico magnets is low, the ratio of length to diameter should be 5:1 or larger so as to get a good work point of Alnico.

2. As Alnico magnets are easily demagnetized by careless handling, it is recommended to make the magnetizing after assembly.

3. Alnico magnets offer outstanding temperature stability. The output from Alnico magnets varies the least with changes in temperature, making it an ideal choice for temperature sensitive applications, such as medical and military.

Definitely we are not an Alnico magnet manufacturer, but we are an expert in magnetic types of permanent magnets including Alnico. Moreover, our own produced rare earth magnets and magnetic assemblies will enable customers to have a one-stop purchase of magnet products from us conveniently.

Cast / Sintered Grade Equivalent MMPA Br Hcb (BH)max Density α(Br) TC TW
mT KA/m KJ/m3 g/cm3 %/ºC ºC ºC
Cast LNG37 Alnico5 1200 48 37 7.3  -0.02 850 550
LNG40 1230 48 40 7.3  -0.02 850 550
LNG44 1250 52 44 7.3  -0.02 850 550
LNG52 Alnico5DG 1300 56 52 7.3  -0.02 850 550
LNG60 Alnico5-7 1330 60 60 7.3  -0.02 850 550
LNGT28 Alnico6 1000 56 28 7.3  -0.02 850 550
LNGT36J Alnico8HC 700 140 36 7.3  -0.02 850 550
LNGT18 Alnico8  580 80 18 7.3  -0.02 850 550
LNGT38 800 110 38 7.3  -0.02 850 550
LNGT44 850 115 44 7.3  -0.02 850 550
LNGT60 Alnico9 900 110 60 7.3  -0.02 850 550
LNGT72 1050 112 72 7.3  -0.02 850 550
Sintered SLNGT18 Alnico7 600 90 18 7.0  -0.02 850 450
SLNG34 Alnico5 1200 48 34 7.0  -0.02 850 450
SLNGT28 Alnico6 1050 56 28 7.0  -0.02 850 450
SLNGT38 Alnico8 800 110 38 7.0  -0.02 850 450
SLNGT42 850 120 42 7.0  -0.02 850 450
SLNGT33J Alnico8HC 700 140 33 7.0  -0.02 850 450
Characteristics Reversible Temperature Coefficient, α(Br)  Reversible Temperature Coefficient, β(Hcj) Curie Temperature Max Operating Temperature Density Hardness, Vickers  Electrical Resistivity Coefficient of Thermal Expansion Tensile Strength Compression Strength
Unit %/ºC %/ºC ºC ºC g/cm3 Hv μΩ • m 10-6/ºC Mpa Mpa
Value -0.02 -0.03~+0.03 750-850 450 or 550 6.8-7.3 520-700 0.45~0.55 11~12 80~300 300~400
Product detail pictures:

Good quality Fecrco Magnet - Alnico Magnet – Horizon detail pictures

Related Product Guide:
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Good quality Fecrco Magnet - Alnico Magnet – Horizon, The product will supply to all over the world, such as: Czech Republic, USA, Croatia, With the spirit of "credit first, development through innovation, sincere cooperation and joint growth", our company is striving to create a brilliant future with you, so as to become a most valuable platform for exporting our products in China!
    • Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!
    5 Stars By Chris Fountas from Armenia - 2017.12.19 11:10
    The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
    5 Stars By Lena from UK - 2018.05.22 12:13

    RELATED PRODUCTS